Show the Glow. The FluoroSphere is a fluorescent light show that provides a unique and glowing experience with each use. Fill the FluoroSphere with water and place it on the UV light stand, add FluoroGel and watch the show develop. As the FluoroGel is dissolved by the water it becomes a highly fluorescent colors: (RED and GREEN). A beautiful light show that is different each time you fill it.
How it works
The FluoroSphere is based on fluorescence (the property of absorbing light of short wavelength and emitting light of longer wavelength). As the FluoroGel dissolves into water it absorbs blue light from the light base and emits a bright yellow-green and/or red light.
4-inch round USB powered light base
6-inch glass orb with silicone stopper and flat bottom
2 x 9ml (RED and GREEN) FluoroGel (Fluorescent concentrate in Mineral Oil)
If FluoroGel has separated, swirl and shake the bottle to thoroughly mix the FluoroGel solution.
Remove silicone stopper on glass orb. Fill glass orb with room temperature tap water. Leave about a half-inch of space from the opening. Do not overfill. Dry outside of glass and place on UV light base. Plug in light base and turn on using the switch on the cord.
Make the room dark. Turn off the lights. The room does not need to be totally dark and UV base will illuminate some of the room.
Gently mix FluoroGel.
Add 5 to 20 drops of each FluoroGel to the orb through the top opening.
Watch the show slowly develop. Take a picture and share it.
The FluoroSphere can be left on the light base as a room decoration.
Pour out and rinse the FluoroShere in the sink. Rinse with warm water. TIP: Turn FluoroSphere upside down and at a slight angle to allow the water to flow out of the hole.