FluoroSphere (limited sale)
Show the Glow. The FluoroSphere is a fluorescent light show that provides a unique and glowing experience with each use. Fill the FluoroSphere with water and place it on the UV light stand, add red FluoroGel and watch the show develop. As the red FluoroGel is dissolved by the water it becomes a highly fluorescent yellow-green. Red FluoroGel is also included for more variation. The FluoroSphere presents a beautiful light show that is different each time you fill it.
How it works
The FluoroSphere is based on fluorescence (the property of absorbing light of short wavelength and emitting light of longer wavelength). As the FluoroGel dissolves into water it absorbs blue light from the light base and emits a bright yellow-green or red light.
4-inch round USB powered ultraviolet (UV) light base
6-inch diameter glass orb with silicone stopper and flat bottom
9ml Green FluoroGel
9ml Red FluoroGel
Plug in the USB UV light base.
If FluoroGel has separated, swirl and shake the bottle to thoroughly mix the FluoroGel solution.
Remove silicone stopper on glass orb. Fill glass orb with room temperature tap water. Leave about a half inch of space from the opening. Do not overfill. Dry outside of glass and place on UV light base. Turn light base on (switch on cord)
Make the room dark. Turn off the lights. The room does not need to be totally dark and UV base will illuminate some of the room.
Gently mix FluoroGel again.
Add 5 to 20 drops of each FluoroGel to the orb through the top opening.
Watch the show slowly develop. Take a picture and share it.
The FluoroSphere can be left on the light base as a room decoration.
Pour out and rinse the FluoroShere in the sink. Rinse with warm water. TIP: Turn FluoroSphere upsidedown and at a slight angle to allow the water to flow out of the hole.